Ƙananan asirin Sabuwar Sabuwar Shekara: Tsauren bishiyoyi na Kirsimeti da hannunka

Za'a samu launuka masu haske na launi daban-daban kusan a kowace farka. Don haka, me yasa ba su samo takardun asali na su ba kuma ba su amfani dashi ba don sana'ar Sabuwar Shekara? Alal misali, don ƙirƙirar itace na maballin. A cikin irin wannan fasaha, maɓallan an maye gurbinsu da ƙananan kwalliyar Kirsimeti da kuma haifar da sakamako uku.

Fuga-fure daga maballin da hannun hannu - koyarwar mataki zuwa mataki

Katin gidan waya tare da aikace-aikacen manya sun dade da yawa kuma ana sayar da su a kusan dukkanin babban kantunan. Zaka iya sa ɗaya daga cikin waɗannan nau'ikan nau'i na katin gaisuwa da igiya na maballin a gida. Domin kullun bishiyar Kirsimeti ya zama kamar zane mai ban sha'awa, yi ƙoƙari ku bi wasu nau'ukan murya kuma kada ku yi amfani da maɓalli na launuka a jere.

Abubuwan da ake bukata:

• wani takarda na farin katako, aunawa 22 da 14 cm
• babban maballin jan - 5 inji.
• matsakaici blue button - 3 inji mai kwakwalwa.
• kananan maɓallin turquoise - 6 inji mai kwakwalwa.
• kananan makullin fararen - 4 inji mai kwakwalwa.
• kananan maɓalli madara - 5 inji mai kwakwalwa.
• Manne "Lokaci" da PVA
• blue thread thread da allura
• na bakin ciki farar fata - 2 cm
• almakashi da mai mulki
• takalma na takarda a jaja

Matakan farko:

1. Cardboard ninka a cikin rabin a cikin hanyar katin rubutu. Rage da ƙarfe sosai.

2. Daga takalma mai laushi ja a cikin akwati, yanke madaidaicin 11 ta hanyar 14 cm don gefen gaba na katin. Ninka cikin rabi kuma yanke siffar itacen Kirsimeti daga 4 tiers.

3. Tsaya katako a cikin caji a gaban katin mujallar Sabuwar Shekara tare da taimakon Plue na PVA. Yi amfani da man shanu a cikin gefuna. Yanke tef a cikin guda biyu na 11 cm kuma manne a saman da kasa na gefen gaba na katin gida.

4. Tare da zane mai launi, danna maɓallin kiwo guda 5 zuwa manyan maƙalar ja. Tsare su da ƙuƙwalwa a ƙananan bangarori na maɓallan ja.

5. Manne maɓalli da manne "Lokaci" a kan stencil herringbone. Na farko saka maɓallin a cikin umarnin da ake bukata. Gwada sanya manyan maɓalli a nesa. Sa'an nan kuma manne kuma latsa kowane daga cikin buttons akayi daban-daban. Za a iya sa hannu a ciki tare da ɗayan ƙauna.

Bishiyar Kirsimeti na maɓalli a kan magnet don Sabuwar Shekara - koyarwar mataki zuwa mataki

Abubuwan da aka samo a cikin akwati na gida, zasu iya kasancewa kyakkyawan ado ga magudi na Sabuwar Shekara. Ba lallai ba ne don saya kaya, tsalle-tsalle masu tsada ko beads don sana'a a cikin hanyar Kirsimeti. Yi wata sheringbone daga maɓalli mai sauƙi kuma za ku ga yadda sauƙi yake.

Abubuwan da ake bukata:

• kwali - 12 ta 10 cm
• babban maballin jan - 4 inji mai kwakwalwa.
• manyan maɓallan launuka - 3 inji.
• maɓallan fari na daban-daban - 7 kwakwalwa.
• matsakaitan launin rawaya - 3 inji mai kwakwalwa.
• Manne "Lokaci" da PVA
• takarda kore - 1 pc.
• m magnet - 3 x 6 cm
• ofisoshin ofis
• fensir da mai mulki

Matakan farko:

1. A kan kwali, zana triangle mai sassauci 12 cm high.Kashe shi.

2. Kewaya zane mai kwalliya a kan takarda kore. Yanke wani yanki.

3. Hanya kayan aikin kore a kan kwali daidai da kwakwalwa. Don wannan, wani bakin ciki na bakin man shafawa mai sutura mai kwalliya tare da manne PVA.

4. Manne maballin tare da manne "Lokaci" zuwa mahaɗin. Ka yi kokarin kada ka bar manyan yatsun kore a kan mahaɗin. Daga magnet mai laushi, yanke madaidaiciyar 3 ta 6 cm kuma manne a baya na bishiyar Kirsimeti.

5. Za'a iya sanya magnet da aka shirya da itace na maballin a firiji. Idan kana so ka ƙara aikin gyaran gyare-gyare, zaka iya zaɓar kowane maballin tare da zane mai launi kafin ka haɗa ɓangarorin zuwa maƙallan.

Ƙunƙwasawa na uku na maballin maballin - umarnin mataki zuwa mataki

Kayan kayan ado na ainihi a cikin itace na maballin yana daya daga cikin hanyoyin mafi sauki da kuma mafi dacewa don yin ado da aikinka ko sarari a gidan. Zaka iya gwaji tare da launuka na maballin maballin, samar da sababbin bishiyoyi Kirsimeti da aka yi da takarda kore. An yi wannan maballin kayan aiki sosai da sauri, kuma sakamakon shine kawai mai ban mamaki.

Abubuwan da ake bukata:

• manyan goge ja - 6 inji.
• matsakaitan launin rawaya - 3 inji mai kwakwalwa.
• fararen fata - 10 inji.
• koreren zane da kuma allura
• PVA m
• takarda mai haske don takarda - 1 pc.
• almakashi

Matakan farko:

1. Yanke gurasar da aka tsara don mazugi. Kuna iya yin ta da idanu, sa'annan ku yanke kaya da aka gama tare da almakashi.

2. Yi amfani da man shafawa tare da manne PVA.

3. Ƙulla kan maɓallin kewayon kore acrylic a cikin tsari ba tare da izini ba. Yi ƙoƙarin kiyaye launuka daga maimaitawa.

4. A tip na mazugi, tabbatar da zaren tare da maballin.

5. Gungura takardun takarda tare da maƙallan launi masu launin da kuma sanya shi tare da kulli. Yi gyaran kafa a cikin hanyar da duk itacen bishiyar Kirsimeti yana da maballin, kamar yadda a cikin bukukuwa.